Colored Tattoo Removal in Daegu: Can PicoSure Pro Treat Blue, Green and Red Ink?
Read the Korean originalSummary The key to color tattooing is choosing the right wavelength for the color. Explains PicoSure Pro's 755nm and optional features, and consultation criteria for multi-color tattoos.
Direct answer
Improvements in blue and green tattoos were reported in studies with the 755 nm picosecond laser. Red, yellow, and orange may require different wavelength selection. Don't rely on the name of one device to determine its ability to remove all colors; check the wavelengths that are actually available.
Before your consultation
- Check separate treatment plans for each color
- Distinguish between 755nm and optional 532nm
- Announce in advance the history of white and flesh-colored top coats and cosmetic tattoos.
General information, not a personal diagnosis or treatment plan. Suitability, risks and recovery require an individual consultation.
What wavelengths does PicoSure Pro see for each color?
The manufacturer's official data introduces 755nm as the configuration for black, blue, and green inks, and the optional 532nm for red, yellow, and orange inks. Optional does not mean that the configuration is automatically included with all clinic equipment.
At the reservation stage, go one step further than asking “Do you get colored tattoos?” and convey each color included in your tattoo. During treatment, it is necessary to check whether a different approach is needed for each wavelength and color that can actually be used. It is recommended not to determine the installation specifications or application scope of individual domestic clinics based solely on the introduction of overseas manufacturers.
Sources and evidence: Cynosure: PicoSure Pro Official Product Guide
Is there clinical evidence for blue and green tattoos?
In a 2012 report, 12 blue and green tattoos were faded by at least 75% after one to two picosecond laser treatments. Tattoos that did not respond well to previous treatment are also included to show the potential in that color. However, the sample size is small and the test does not compare all colors.
Therefore, it would be inaccurate to translate this result into “Color tattoos take just two steps.” Even though it appears to be the same blue, I don't know if my tattoo is in the same condition as the study case. In a consultation, rather than asking for the number of studies, it is helpful to have it explained to me which color reaction I would like to check first in my tattoo.
Sources and evidence: Report on picosecond laser treatment of blue and green tattoos (2012, PMID 22801616)
How do I get advice on tattoos with multiple colors?
Look at a photo of the entire tattoo to distinguish black borders, colored areas, and bright highlights. If you point out the size and location of each color, the consultation will become more specific. Instead of just looking at one color change and expecting the whole thing to disappear at the same rate, ask which parts can survive until the end.
For example, if there is a design with green leaves, red flowers, and black text, you may be asked if each needs to be evaluated. This does not mean that you should divide treatment based on your own judgment, but it is a way to organize questions to check during treatment. Even if you only want to lighten some colors, indicate the border you want to leave on the photo.
Do I need to know in advance about white or flesh-colored ink?
Please let us know if you have ever had a cosmetic tattoo touch-up or added bright color to cover up an existing tattoo. In past cosmetic tattoo case reports, it was observed that the color darkened after the laser, contrary to expectations. This data does not imply the frequency of occurrence in modern equipment, but it does show that it is difficult to ensure a safe reaction based on color names alone.
If you don't know if bright ink was used, see if you can obtain records or photos of where the procedure was performed. There is no need to arbitrarily assume information that cannot be confirmed. At the consultation, it is a good idea to ask whether a laser test spot on a small area is needed and when to evaluate the response.
Sources and evidence: A case of paradoxical post-laser pigment darkening of cosmetic tattooing (1993, PMID 8352605)
Look at before and after photos by color rather than the overall average of tattoos.
When taking photos, compare which colors have changed and how they have changed at the same location. When large areas of black become lighter, it may feel like the whole thing has changed a lot, but the small areas of color you care about most may still be noticeable. It is a good idea to first decide which part determines your satisfaction.
Adjust the shooting conditions so that you do not judge color changes based solely on retouched photos or warm indoor lighting. It is easier to understand the explanation if you separately record with the medical staff “Is the outline remaining, is the filling color remaining, and is the color of the skin itself different?” Do not delete photos before treatment, but organize them by session.
What answer should I receive from a color tattoo consultation?
Find out what you plan to do with your color combination, whether a laser test spot is needed, when to evaluate reactions, and alternatives for the remaining colors. If you are offered a different equipment or treatment strategy in an actual practice, you can ask for an explanation of the color that is why the change is made. Look for a clear explanation of the color-based judgment process rather than a statement that says one piece of equipment solves everything.
When comparing your budget, you should also check whether the entire tattoo is included in the price or whether additional treatments for specific colors are separate. It's easy to put together a plan if you communicate your desired goal of complete removal or cover-up preparation. If you discuss at the beginning of the consultation any issues that may remain until the end, you can reduce the risk of misaligned expectations during treatment.
How to prepare for your color tattoo consultation at Jungang-ro
If you are looking into color tattoo removal in Daegu Jungang-ro, mark visible colors such as blue, green, and red on the photo. Before visiting Dongseong-ro, inquire about the actual available wavelengths, and if you have a history of applying bright colors, please leave it in the reservation note so we can discuss color plans.
FAQ
Does 755nm erase all colors equally?
The same approach is not applied to all colors. You need to check the color and available wavelengths together.
If my clinic has PicoSure Pro, does it also have 532nm?
Since this is optional, you should check your actual installation configuration.
Will the green disappear completely in two?
Thinning beyond 75% in small studies does not guarantee the number of complete removals in an individual.
Sources and evidence
Sources checked: 2026-09-09
- Cynosure: PicoSure Pro Official Product Guide
Introduction to 755nm and optional features. This data is for the United States and is separate from domestic installation options and permission scope. Some before and after photos are clearly stated to be from previous PicoSure models.
- Report on picosecond laser treatment of blue and green tattoos (2012, PMID 22801616)
Due to a small report of 12 tattoos, we do not guarantee removal of all colors, products, or skin counts.
- A case of paradoxical post-laser pigment darkening of cosmetic tattooing (1993, PMID 8352605)
Five case reports. It does not refer to the incidence of the latest specific equipment and is a basis for explaining the need for testing.
Translated from our Korean educational content using machine-assisted translation and terminology checks. This is not a claim of independent medical review. Study limitations and source links are retained; please ask the clinic about anything unclear.